[colgad]

Originally Posted by gottattooz

I bought a bed liner kit and coated the floor of the new cab from the firewall all the way back to where the fuel tank sits under the rear window. I d/a sanded the whole floor with 80 grit and wiped everything down with lacquer thinner. It looks cooler than i thought it would. Supposedly it takes 5 days to fully cure, so I'll be looking for other stuff to do in the mean time.

-Josh

I am about to do the same on my SonInLaws bed. At Stephens request his dad is getting him a color bed liner kit (Red) for his birthday this month. We covered the rotted floor with 3/16 flat steel and welded it in. What type of gun did you use?
I have been putting together a 5.3 for my Blazer using the new FiTech port Fuel Injection it's pretty cool as you can tune the engine from inside the cab with a controller. It comes with an intake and fuel rails new injectors and wiring harness with the computer too. But you can get it with just the computer and harness so you can use the oem intake and injectors.