The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - manual tranny bellhousing won't quite connect to engine

geezer#99 · 06-24-2017, 09:09 PM

Loosen the pressure plate enough that the disc is free to move. You don't have the disc quite centered with the pilot bushing.
Then it should all slide together.

06-24-2017, 09:09 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,522	Re: manual tranny bellhousing won't quite connect to engine Loosen the pressure plate enough that the disc is free to move. You don't have the disc quite centered with the pilot bushing. Then it should all slide together.