[gottattooz]

I put the 67 cab on today after work. I was waiting on a trans dipstick grommet to come in so i could replace it while it was easily accessible.

To install the cab without removing the doghouse, I put jacks and jackstands under the back of the front fenders. I strapped the jig across the front, just above the windshield to keep it from sliding backwards because of the angle it's on.

I got the top rear fender holes to line up with the mount holes on the cab and put two bolts in there to help line everything up as i lowered the cab. I used new polyeurathane body mount bushings and bolted everything together. Now there's room in the garage to work on the bed.

-Josh