Now remember back in the original picture of the kit with parts labeled, A, B, C...Well the part labeled "D" is a centering tool. It makes life much easier when doing this project.
Tool Dimensions
A= The outside diameter of your shift tower
B= The exact inside diameter of your shift tower
C= the distance measured on your shifter stub, from inside the slots that the pivot pins recess into. C MUST be centered on B. C is the stop point that keeps your stub centered... Pics comming.
D=3/16 (both)
E= arbitrary just as long as it goes deep enough into the shift tower to get past the pin holes and doesnt contact the stub seat.