Some of you may have caught that I kept the holes to mount the OEM parking brake pedal but I didn't keep the hole for the cable. There are some bolts in there now. Hmm.
The pedal is installed. So now you're thinking, is it cable still or did he retro-fit an electric kit?
Here is the cable routing from the rear. I run along the top 4-link bar and then cross over to the frame right near the rod ends. This is because the cable will experience the least amount of movement due to the suspension at this point. I then run over to the driver side where the cables converge to a custom bracket I made.
Here's the bracket. Nothing special, but built to provide the proper spacing and provide "full pull" capability.
Here's the bracket after it's been installed.