The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - MD WTB

**randy.powell** · 09-08-2017, 08:36 AM

The bushing (and retainer) I need is where the cowl vent flapper pivots on the inner firewall. Not the one closest to the vacuum actuator but the one further back (under the windshield). Only found on A/C equipped trucks...

May also be found on other GM vehicles of that era but not sure of that. Have looked through every catalog w/no success...

Any help would be greatly appreciated.

Thanks,
Randy

09-08-2017, 08:36 AM	#1
randy.powell Senior Member Join Date: Jun 2014 Location: Bushwood, MD Posts: 510	WTB - A/C Cowl Flapper Bushing Needed The bushing (and retainer) I need is where the cowl vent flapper pivots on the inner firewall. Not the one closest to the vacuum actuator but the one further back (under the windshield). Only found on A/C equipped trucks... May also be found on other GM vehicles of that era but not sure of that. Have looked through every catalog w/no success... Any help would be greatly appreciated. Thanks, Randy