Re: 1946 chevy truck build.
Need some help. I feel my 4 link is getting too much pinion angle change.
Ride height is 6.5 inches off the ground have it set at +3 for pinion angle. When aired down goes all the way too -6 degrees and i believe around +1 or 0 aird all the way. What did I do wronf?? My lowered are parallel with floor. My uppers are -3 , IC being at firewall. Lower bars are 21 inches bars alone. Uppers. 13 bars alone.
Need some help figuring out why this is getting so much pinion angle change
|