Re: LT1 GenV swap
Feeling confident the a/c compressor adapter mess is sorted:
Plenty of frame rail clearance
The motor mount stand is close, but a tad bit of trimming for when the motor mounts wear/sag is needed.
Shortened the stock transmission dipstick tube. Measured the bottom of the tube to the cold mark before modding it. Made the short end a slip fit so it can beheaded or tig welded. Just need to test fit one more time before joining them together. The dipstick indicator will just get cut and welded.. similar to the ls1 dipstick.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|