Quote:
Originally Posted by UGAK5
Thanks Mike - - I never could find the windows in the Assembly Guide. I am surprised there's that little tolerance! Looking at Pete's pics, they look centered from the ends. Would hate to weld them in and get it wrong.....new windows and new sashes would have to be bought. UGh.
Splash shields = HUGE PITA, but yes, they are on.
Chris
|
Sorry for the confusion. I couldn't remember for sure if it said .76 or .79. That's why I said .76-.79.. The manual didn't specify a range of tolerance. I measured my at exactly 3/4" and worked out perfectly. I took the page out of the book so I could easily have it handy and must of miss placed it or I'd post a photo of here for you.
For some reason, I think they used window weld, but I could be wrong. The first time I had them set the glass, I measured it wrong and was off by 1/4" Luckily, I was able to get the windows out of the sashes without any damage.. Only took about 4 hours, a heat gun, and 100 razor blades..
Good luck with the doors... Not sure if you've come across this thread but if you follow this sequence, the entire door assembly goes in smooth and easy.
http://67-72chevytrucks.com/vboard/s...d.php?t=732400