Re: '78 K20 to C10. Almost 20 years in the making.
Got the front subframe located today. Made a template out of a sheet of aluminum. It worked prefect on the drivers side. I tried using it on the pass side and the holes werent perfect but i made it work and the subframe is square to the frame and located correctly. I still need to drill the holes for the idler arm and locate the holes for the swaybar bracket. I also need to modify and relocate the front brake line where is passes through the frame.
Last edited by cruizin01; 11-20-2017 at 03:38 PM.
|