Quote:
Originally Posted by LockDoc
-
I don't remember seeing a step by step but basically just put the seal up in the cavity on the inside of the firewall, insert the arm through the hole with the pump in the up position and put the 3 special mounting screws in the holes, and screw them in.
The brown connector is for the washer pump & the two Black ones are for the wiper. The notches in the connectors fit over bumps on the terminals so they can't be plugged in wrong. (First picture)
Here is a visual and info on the park markings on the wiper motor and arm.... (Second illustration.)
Edit: Added a picture of the 3 special mounting screws.
LockDoc
|
Awesome. I think i have everything except the wiring harness. Any idea where to buy just that? I have the motor and wiper arms just nothing to wire or mount.