Quote:
Originally Posted by Dieselwrencher
Nice work on the rust repair!
|
Its been a process, I try to set a goal for the day in the garage on rust repair. One area at a time so I can celebrate little victories and not get overwhelmed.
Quote:
Originally Posted by Greg58
Looking good!
Greg
|
Thanks!
Here is the passenger side inner rocker/outer floor all installed, also forward floor section and bottom of kick panel all welded in and primed. I use Rustoleum rusty metal primer in the quart can. I like using this the first round and apply with brush, then after dry knock it down to smooth it out, then follow with spray on type before paint.
Now I have both sides rust repair complete and also have made the necessary adjustments to the rocker panels so that they fit properly. Next to drill a few weld holes and attach the rockers, then seam seal in areas as they were from factory.