Re: Big Bird - 1972 Longhorn K30
Tonight was more productive. Got the rest of the springs and hangers mocked up and most holes drilled. Just have to do the bottom. I had to remove the rear parking brake brackets and take out the rest of the rivets on that cross member.(I am looking forward to being done with rivets even with an air chisel) I left the rear hangers in factory location and was able to line up with one bolt hole in the frame for the front hanger which made doing the other side easier. I wanted to stay with factory measurements so the rear springs are from a P30 van. Right or wrong that's the way I went and we will see how she rides. One nice thing about having the K20 next to Big Bird is it's handy for reference.
Last edited by BlueBullet; 01-02-2018 at 10:23 PM.
|