[N2TRUX]

This weekend I focused on getting the wiring corrected on the RideTech system. I have an older version of the Big Red valves (ARV 7000) that was connected to a Ride Pro E3 management system. The Big Red valves have had some updates including changing from 4 two pin connectors to 2 four pin connectors.

I was able to get the system running using an adapter harness that was on my Ride Pro E3. Unfortunately it was too short to route inside so it had to be under the cab. I decided to clean things up and convert the valve harness to 4 pin connectors. I had the pin extractor tool and 4 pin connectors, but had to chase down new pins locally. Just so you know, Oriellys Auto Parts does carry them.