Quote:
Originally Posted by lolife99
Ken,... I would be really tempted to just "gut" your stock proportioning valve and add a Wilwood adjustable prop. valve in the rear brake line.
http://www.pro-touring.com/threads/7...rtioning-valve
I never knew why GM ran all those lines to the front,... just to have to route them to the rear.
I think it would make a clean "stock appearing" option than bending all new lines.
And if you did bend all new lines,... I would move the Prop valve to an "easy-to reach" spot on the drivers side frame rail under the cab.
Just my thoughts,...
|
Keith I was too deep in the project when I discovered how much needed to be modified to turn back. When I'm done it will look clean, and be accessible with out crawling under the truck to adjust it. If I could locate the fittings I need I would be done by now.