Thanks guys that helps a lot. So I called inline tube and they said the that their 2wd brake line clip kit is the same for the 4x4. The guy wasn't sure why they list it specifically for the 2wd.
So I bought a kit and found out only 5 clips are actually usable from the 26 pieces the package comes with. So now I'm back to finding used clips..
To possibly help others out in the future, I've taken pictures of where my brake lines are running and where I
THINK these brake line clips are supposed to go.
Can anyone confirm that brake line clips are actually where I've highlighted? Am I missing anything?
Red circle = brake line clip
Yellow circle = distribution block
#1: Front driver side - to master cylinder
#2 Front driver side - distribution blocks
#3 Front driver side - to left front wheel
#4 Front crossmember
#5 Front passenger side
#6 Front passenger side - brake line union
#7 Passenger side - near transmission crossmember
#8 Passenger side - near np205 frame mount
#9 Passenger side - near bed mount tower
#10 Passenger side - near rear shock mount
#11 Passenger side - near rear bump stop
#12 Rear axle - cover clip and distribution block