The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MARTINSR · 01-29-2018, 02:08 AM

I just found that I am missing the rear window channel on the drivers door. The one that screws in over the top of the latch. They are different side to side. If you look at the bottom of the channel in my photo you can see it leans to the right, that is for the right door, I need the one that leans to the left.

Brian

01-29-2018, 02:08 AM	#1
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Need a door window channel for my 48. I just found that I am missing the rear window channel on the drivers door. The one that screws in over the top of the latch. They are different side to side. If you look at the bottom of the channel in my photo you can see it leans to the right, that is for the right door, I need the one that leans to the left. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"