Pictures:
1. Inner kick panel. Thought I'd put a little rust encapsulator in the pillar while it was open. Yes, I removed the bolts from the lower door hind. I just stuck them in there as to not fill the bolt holes with primer.
2. Shot of tacked in inner rocker and kick panel
3. Door gap at the top??
4-5. Bottom door gap??
This is kind of pain, yet fun. Needs a little more work. Gonna have a little work to do on the inner cab support; somebody really welded it in there. Will not fully weld in panels until I too the support work under the floor area. It's bad!
Also, you can see the slight bow in the outer panel.....oh well.
Thanks Mike