The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Utahboy** · 02-03-2018, 11:43 AM

Finally was able to get these made!! These are the Stainless Steel Hold Down Trim Strips for single wall tops. Made with the same thickness Stainless as the originals and then polished to a bright finish. Correctly formed to fit perfectly.
Only difference is the ends where the originals have a small bulb type corner that we were not able to duplicate. (See Pics)
$125 for a set shipped conus.
I can also provide the original type chrome hex bolts for an additional $15 for a quantity of ten.
Please reply to this thread if you would like a set. Thanks

02-03-2018, 11:43 AM	#1
Utahboy Senior Member Join Date: May 2014 Location: Linden, Michigan Posts: 418	NEW Single Wall Top HOLD DOWN STRIPS Finally was able to get these made!! These are the Stainless Steel Hold Down Trim Strips for single wall tops. Made with the same thickness Stainless as the originals and then polished to a bright finish. Correctly formed to fit perfectly. Only difference is the ends where the originals have a small bulb type corner that we were not able to duplicate. (See Pics) $125 for a set shipped conus. I can also provide the original type chrome hex bolts for an additional $15 for a quantity of ten. Please reply to this thread if you would like a set. Thanks Attached Images