The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

'65 chevy lover · 03-19-2018, 08:51 PM

Well, I talked to an old forum friend and he answered some questions I had but, posted some new questions. He verified that 1/4" threads is what the threads should be in the floor but, really didn't have an answer for the fact that mine are 5/16. I did call Classic parts, Brothers trucks and speedway. The studs that these places had were all 1/4". So, if there is room, I'll put nuts and washers behind the floor on the studs I have and, push come to shove, I'll cut the threaded part off of the studs I have and weld 5/16" bolts on to that. There's more than one way to skin a cat!...lol Thanks to everyone for the help, it was much appreciated!

03-19-2018, 08:51 PM	#10
'65 chevy lover Registered User Join Date: Apr 2011 Location: Ft. Worth, Tx Posts: 536	Re: Throttle foot peddle bolts Well, I talked to an old forum friend and he answered some questions I had but, posted some new questions. He verified that 1/4" threads is what the threads should be in the floor but, really didn't have an answer for the fact that mine are 5/16. I did call Classic parts, Brothers trucks and speedway. The studs that these places had were all 1/4". So, if there is room, I'll put nuts and washers behind the floor on the studs I have and, push come to shove, I'll cut the threaded part off of the studs I have and weld 5/16" bolts on to that. There's more than one way to skin a cat!...lol Thanks to everyone for the help, it was much appreciated!