[cadillac_al]

Originally Posted by sweetk30

fairly straight forward .

biggest thing is in some 2wd had low floor hump depending on trans used .

4x4 = high hump .

but I have a few 2wd body's on my 4x4 frames . just had to do a small body lift to clear the 2wd low hump floor pan .

1 I did years ago I did a 2" body lift . I am doing another now and going to try a 1" body lift .

otherwise its a fairly basic swap over .

I am hoping to do this swap this year. I planned to do the 2" body lift and not cut the floor too much. Do you think 1" will work? I hope so. I would rather do that if it's feasible.