Re: Tow Bar Ideas 71 C10
I’ve used a tow bar several times and I always just unplugged the 2 lights then removed the 6 bumper bolts. I have a piece of c channel with holes that match the frame that is attached to my tow bar. I can usually switch it in 20 minutes. Also, if you want the taillights on your towed truck to work, you can unplug the taillight wiring harnesses at the firewall and connect to your truck that is pulling it by using a flat 4 trailer wiring harness. I made mine using the female plug from a old harness- hope this makes sense
|