[aotte1]

A little more information, including previous information from member 60-66.

“There are the two main brackets for power steering on all 63-66 trucks 230 250 and 292. The difference with a 63-66 292 is the pumps pulley and (lower support arm, not shown in photos below). These same brackets were used on all passenger car sixes also, Camaro Nova Chevelle and Impala and were in use on 230-250 trucks till 1970 according to the parts books.”
The above mentioned brackets are not correct for 67 up 292 but are correct for 63-66 292. (See Bowties11 post below for more information on 67’ up 292 brackets)

Note: the flat lower support arm/bracket that bolts to the block for the 292 engine is different, it is longer, then the smaller 6 cylinders. Photo of it not shown below.

Last two photos are from member 60-66. Most of this knowledge is from member 60-66.