Re: A/C line, condener, dryer components and fitment issues
I'm fairly certain the earlier 80's A/C setup is a lot different than the late. You will need the later style drier without the tube on the bottom and the matching line set. I would recommend the APDI/Pro 7013642 condenser because its a perfect bolt in and also a parallel flow for 134. As you have found out, the spectra does not fit. If you are replacing the compressor and don't have it, there is a difference in coil position (9:00 or 12:00) and that also effects the compressor clutch and pulley. I hope this helps.
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
|