The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

phat69 · 05-12-2018, 12:12 AM

You will need the lower control arms and spindles from the donor truck.
http://www.azproperformance.com/Alum...71-87-C10.html
I used these for the tie rods. You can also use the center link from the donor and skip the sleeve.

05-12-2018, 12:12 AM	#14
phat69 Registered User Join Date: Mar 2018 Location: Texas Posts: 51	Re: C20 3/4 ton brake upgrade question You will need the lower control arms and spindles from the donor truck. http://www.azproperformance.com/Alum...71-87-C10.html I used these for the tie rods. You can also use the center link from the donor and skip the sleeve.