The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OregonNed · 05-23-2018, 10:34 AM

My truck started life with a manual transmission, which was replaced with a TH-350 by a previous owner. I've seen what I believe is the wire that used to go to the transmission - hanging disconnected and taped down near the bundle that goes from the firewall to the starter. It is a purple wire. Now I am getting ready to install a floor shifter (new) with a neutral safety switch - (the old shifter did not have that option). What is the best way to newly wire the new switch?

05-23-2018, 10:34 AM	#1
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Neutral Safety Switch wiring My truck started life with a manual transmission, which was replaced with a TH-350 by a previous owner. I've seen what I believe is the wire that used to go to the transmission - hanging disconnected and taped down near the bundle that goes from the firewall to the starter. It is a purple wire. Now I am getting ready to install a floor shifter (new) with a neutral safety switch - (the old shifter did not have that option). What is the best way to newly wire the new switch? __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop