Re: 71 Cheyenne Rooftop Build
I have not updated in a long time but I have been working on the truck. I recently did some body work at my parents house. I cut out the PS front cab support, inner rocker, outer floor (the "gutter"), and outer rocker and welded some new metal in. My welding is in its infancy but I know how to use a grinder. I also welded up the gas filler hole and the "gutter" area of the floor by the DS door. I have done a lot of patches on the lower doors inside and out. Lastly, I need to tackle the drip rail as it is rough. I replaced my head gaskets recently as I had a leak but I didn't take pictures. Last for this post is my distributor wires were hanging by a string so I rebuilt this whatchamacallit.
|