The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cebra · 06-08-2018, 11:00 AM

Thanks for all the feedback, I have a list of things to check. I have forgot some of the things I have done and I did reset the float levels watching a Holley video. The back one was letting fuel pour out of the bowl so I got that dialed in but will check again.

I set the timing to 12 and every degree past 6 made the engine open up, it ended up at 2,600 at 12...so I moved it back for now. I think the carb/vac issue will need to be sorted out before I can properly set the timing.

06-08-2018, 11:00 AM	#19
cebra Registered User Join Date: Jan 2018 Location: Durham, North Carolina Posts: 782	Re: 350 Tuning Issue Thanks for all the feedback, I have a list of things to check. I have forgot some of the things I have done and I did reset the float levels watching a Holley video. The back one was letting fuel pour out of the bowl so I got that dialed in but will check again. I set the timing to 12 and every degree past 6 made the engine open up, it ended up at 2,600 at 12...so I moved it back for now. I think the carb/vac issue will need to be sorted out before I can properly set the timing.