Quote:
Originally Posted by davepl
I'd run a separate wire and I'd make sure it's fused. You don't want a problem with a fan shutting down your ignition circuit. Plus, according to my fusebox, it's labelled IGN UNFUSED and you don't really want a bunch of unfused stuff anyway!
I assume you have a relay for each fan and we're talking about the trigger wire? Normally, you'd power the fans right off the battery to the relays and the only power from the harness is to trigger them ON, not to power them.
|
Correct, they came with all the fuses and wiring, I am just trying to find the best place to connect the trigger wire, I thought it was best to use the IGN UNFUSED tab in the fusebox (and put an inline fuse in) but both of mine are in use. Just need to know if I connect another wire to one of the ones coming off of the wires connected to the IGN UNFUSED that it wont draw too much off and cause problems.
Thanks for your help.