The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Beatrice · 06-26-2018, 10:08 AM

i'm using a "c" or "u" shaped hinge that as the bed hinges up it goes toward the rear of truck a bit. it's not much the wood is still close to hitting. I also put a 45 degree cut on the front of the wood pieces so that when it goes up there is more clearance on the bottom side of the wood so it doesn't come in contact.
i'll see if I have any more detailed pics on my phone and post up when I get a chance.

06-26-2018, 10:08 AM	#40
Beatrice Registered User Join Date: Dec 2017 Location: Ohio Posts: 36	Re: Saving the 63' from the grave i'm using a "c" or "u" shaped hinge that as the bed hinges up it goes toward the rear of truck a bit. it's not much the wood is still close to hitting. I also put a 45 degree cut on the front of the wood pieces so that when it goes up there is more clearance on the bottom side of the wood so it doesn't come in contact. i'll see if I have any more detailed pics on my phone and post up when I get a chance.