The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Pro299** · 06-28-2018, 10:50 PM

Don't see why not. If the booster is designed for the truck then the bolt pattern for both the bracket and the master cylinder should be the same. On the back of the boosters you should probably check the position of the pistons. You may need to adjust the pivot arm slightly if they're different.

06-28-2018, 10:50 PM	#2
Pro299 Junior Member Join Date: Jul 2014 Location: Huntsville, AL Posts: 75	Re: 72 brake booster Don't see why not. If the booster is designed for the truck then the bolt pattern for both the bracket and the master cylinder should be the same. On the back of the boosters you should probably check the position of the pistons. You may need to adjust the pivot arm slightly if they're different.