Thread: Tbi vortec swap
View Single Post
Old 07-07-2018, 01:29 PM   #7
Kudzupatch
Registered User
 
Kudzupatch's Avatar
 
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
Re: Tbi vortec swap

Quote:
Originally Posted by Acorn View Post
.......
Your tbi fuel pump will not be enough psi. I just use am'96 vortec pump.
I run about 18 psi fuel pressure. (Compared to stock TBI that was like 11 or 12 psi. So you will need an adjustable fuel pressure regulator or a different spring in stock regulator.
Make sure you have a water pump with a bypass hose.
Everything from your '87 will bolt to the l31 block.
........
Planning on the same swap and this is pretty much what I have found after a lot of research but you will probably need a new fuel pump because stock will not generate more than 14 lbs usually.

You can use an aftermarket intake and buy/build an adapter plate.
You will have to fabricate or modify your throttle cable bracket.
You will need a new tune, engines are radically different and it's never going to run right with the existing tune.
Kudzupatch is offline   Reply With Quote