Re: Restoring Rusty
naturally the input shaft separated from the main shaft and half a dozen needle roller bearings were on the run, there are 14 total
Important Lesson Learned: I sorta knew this already but the eye opening experience is to discover that although the short input shaft is on the same plane as the main shaft ie they make one horizontal line, they are actually two separate spinning shafts independent of each other, don't laugh it's obvious to sum, but us idiot savants need time to digest, jk
I believe the 4th gear ie direct drive, so 1:1 ratio lives on the input shaft
Last edited by Gregski; 07-27-2018 at 11:26 PM.
|