The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - PA Another 72 part out have to thin the herd

**1rippen6** · 08-26-2018, 11:55 AM

[QUOTE=Jasko59;8330529]Are the axles available (individually or the pair)? If so, what is their ratio?
Also interested in the A/T steering column if you're parting that out.
I'm also interested in the windshield frame, or the frame/firewall/cowl unit if that's easier.

I can pick up since I'm only about 2 hours away.

Can you quote me prices on anything above that's available? Thanks.[/QUOTE

Axles are 3:08s, I also have a set of 3:73s but the rear axle tube has a hole where the axle u-bolt bracket sets that will need welded shut. 300 for either pair. I guess you could swap the 3:73s into another housing.

Steering column 75 without the steering wheel.

Keeping the windshield frame for myself for now.

08-26-2018, 11:55 AM	#68
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,712	Re: Another 72 part out have to thin the herd [QUOTE=Jasko59;8330529]Are the axles available (individually or the pair)? If so, what is their ratio? Also interested in the A/T steering column if you're parting that out. I'm also interested in the windshield frame, or the frame/firewall/cowl unit if that's easier. I can pick up since I'm only about 2 hours away. Can you quote me prices on anything above that's available? Thanks.[/QUOTE Axles are 3:08s, I also have a set of 3:73s but the rear axle tube has a hole where the axle u-bolt bracket sets that will need welded shut. 300 for either pair. I guess you could swap the 3:73s into another housing. Steering column 75 without the steering wheel. Keeping the windshield frame for myself for now.