The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Steering Knuckle & other part Identification

**PGSigns** · 09-07-2018, 08:27 PM

The a arms look like western chassis. The spindle and rotor look like 73 to 87 HD 1 1/4 stuff. The ball joints should be 73 to 87 C10. Now the tie rods will be from the same vintage going by the steering box and the idler arm. I would try this stuff first. The FAQ section has a lot of links to threads going over this swap. Everything under the front of my 66 is out of a late 70's donor truck.
Jimmy

09-07-2018, 08:27 PM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Steering Knuckle & other part Identification The a arms look like western chassis. The spindle and rotor look like 73 to 87 HD 1 1/4 stuff. The ball joints should be 73 to 87 C10. Now the tie rods will be from the same vintage going by the steering box and the idler arm. I would try this stuff first. The FAQ section has a lot of links to threads going over this swap. Everything under the front of my 66 is out of a late 70's donor truck. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic