The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67 Burb · 09-21-2018, 07:37 PM

You may run into problems if all the pieces are from different vehicles or different years. I was piecing together the same thing with pieces from 1989 and 1995, and found that the pulleys didn't line up. About the engine you're putting this on; did it originally have a short or long water pump? If it originally had a short pump, and your CCW pump will be a long pump (if it is a stock pump for a serpentine equipped engine) then things will definitely not line up.

Also, don't forget that you will need a CCW fan as well.

09-21-2018, 07:37 PM	#2
67 Burb Registered User Join Date: Dec 2011 Location: Brandon, Manitoba, Canada Posts: 546	Re: serpentine question You may run into problems if all the pieces are from different vehicles or different years. I was piecing together the same thing with pieces from 1989 and 1995, and found that the pulleys didn't line up. About the engine you're putting this on; did it originally have a short or long water pump? If it originally had a short pump, and your CCW pump will be a long pump (if it is a stock pump for a serpentine equipped engine) then things will definitely not line up. Also, don't forget that you will need a CCW fan as well. __________________ Bob 1967 2wd Burb, 350/TH350, 3.73 posi