[tommy3horse]

Hi, I chased a nasty miss on the “new” crate motor, now with 7k miles. I replaced the hei cap and rotor, pulled the carb, completely dissassembled it and cleaned it. I didnt find the issue until I pulled the plugs and found #6 fouled terribly. Yikes. The wire had been rubbing on the dipstick tube and sure enough there was gray “tracks” on the tube.
I replaced the wires and 8 fresh R45TS plugs and that wire. Now she runs on all 8 and goes like the wind....
Day well spent!

Tom