[Stocker]

Originally Posted by Andy4639

The wiring is simple enough.

If you do this upgrade take the time and strip the wiring harness from the voltage regulator back to the red wire going to the alternator.

Take the small red wire from the external voltage regulator and install it on terminal #2 on the new alternator.

Take the small brown wire and install it on terminal #1.
Put the big red wire back on the new alternator and your done.

What about the blue wire and the white wire on the external regulator? Pretty sure they go to the 2 terminals on the existing alternator now. Will they just not be used with the new internally regulated alternator?