The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

my kids toy · 10-10-2018, 03:08 PM

I finally got my EFI pump set up done and have $180 in it with the welding.
It looks like what boyds offers.
I had a local welder weld a piece of aluminum angle iron on my clean out and had him weld the gas line fitting.
I used these parts from summit
wire thru bulkhead fitting # ABT-CFD-504
6AN male to 5/16 barb # SUM-220188B
and the fuel pump # AEI-11542 ( the gas line that comes with the kit is only 4" and you will need a 5 1/4" gas line for inside the tank.)

10-10-2018, 03:08 PM	#15
my kids toy Registered User Join Date: May 2018 Location: Grand Haven, mi Posts: 270	Re: boyds tank in tank fuel pump questions I finally got my EFI pump set up done and have $180 in it with the welding. It looks like what boyds offers. I had a local welder weld a piece of aluminum angle iron on my clean out and had him weld the gas line fitting. I used these parts from summit wire thru bulkhead fitting # ABT-CFD-504 6AN male to 5/16 barb # SUM-220188B and the fuel pump # AEI-11542 ( the gas line that comes with the kit is only 4" and you will need a 5 1/4" gas line for inside the tank.) Last edited by my kids toy; 10-21-2018 at 04:25 AM.