[quote=jeffahart;8362119]
Quote:
Originally Posted by SangerV
As far as lift, nothing is exact from system to system. When you get a 4" lift kit with rear blocks, the front sits higher than the rear. You would really need to measure to the frame and get a stock profile measurement. But, if you have 4" blocks in the rear you could get 4" springs and a 1" zero rate leaf/block for the rear to level it off. If what you have is more like 3" in the front then you might not be happy with the extra inch. In short, I don't know what would give you exact same height you have now. I think you are assuming 4".
For the horns, you need to whack them off another frame. The bumper mounts snug to that horn and has braces from the ends of the bumper going to the frame. You need to finesse the horns on there so the bumper fits nice.
j
j
|
Thanks J