[WB72]

I have come to realize that body work is going to happen, I just want minimal amounts.

I think I am going to build a new 1/4” plate threaded to the template of the larger opening of the cab.

I’ll cut a 3/8” or so slot on the front of the pillar as close to the height of the hinge position.

Tack a rigid wire to the threaded plate.

Fish it into place and thread all 3 bolts into the plate.add a dab of silicone to the plate and tighten the bolts to allow the silicone to dry.

Remove wire.

Repair cut out slot.

Install door hinge.

If adjustment is required I’m sure the silicone will give way and allow movement with persuasion.


I would like to know if there are any issues other than not being able to remove the door hinge ever again without losing that plate once again.