The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1970 c10 distributor upgrade recommendations

**Boog** · 10-20-2018, 11:21 AM

Check your local parts store or Summit or Jegs for whats available. You should be able to buy a GM hei for $125 or so and be able to buy parts most anywhere when needed. Hard to beat.
I bought one of those skip whites for $50 a few years ago for a fresh 350. Its pretty alright. The engine ran in the shop only as the truck is not road ready yet and the module went bad with only some hours run time on it. I pulled the
module from the old OE hei and put in the SW. It still hasn’t made it to the road but it still starts every time.

10-20-2018, 11:21 AM	#11
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,036	Re: 1970 c10 distributor upgrade recommendations Check your local parts store or Summit or Jegs for whats available. You should be able to buy a GM hei for $125 or so and be able to buy parts most anywhere when needed. Hard to beat. I bought one of those skip whites for $50 a few years ago for a fresh 350. Its pretty alright. The engine ran in the shop only as the truck is not road ready yet and the module went bad with only some hours run time on it. I pulled the module from the old OE hei and put in the SW. It still hasn’t made it to the road but it still starts every time. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross