The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

61K10 · 10-25-2018, 02:43 PM

yes as aotte1 (les) said go through his thread as there is info. if i remember right the difference is the front bolt setup. the early ones have a bolt and nut. it also screws into the hanger (nut comes off then unscrew the bolt) the later fronts are similar to the rear ones as they screw in. I only had to replace the front bushings as my bolts were good. Go to aotte1's build as much info there as in mine.

LMC truck part? classic parts?

10-25-2018, 02:43 PM	#31
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Work begins on the 1962 C10 4WD yes as aotte1 (les) said go through his thread as there is info. if i remember right the difference is the front bolt setup. the early ones have a bolt and nut. it also screws into the hanger (nut comes off then unscrew the bolt) the later fronts are similar to the rear ones as they screw in. I only had to replace the front bushings as my bolts were good. Go to aotte1's build as much info there as in mine. LMC truck part? classic parts? __________________ 1961 chevy K10 my build is------------61K10 build