The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**oldman3** · 11-02-2018, 07:52 PM

Well, I had noticed that my brake pedal was down low to the floor, after checking Mark said I needed a new master cylinder. So this morning he installed the new unit and we bleed the brakes, everything good now.

After that I installed the running board, running board splash apron, etc on the pass. side of truck. I started on the drivers side, but still need to install the splash apron. Will do that tomorrow and take care of a few small things.

Here's a couple pics...Jim

11-02-2018, 07:52 PM	#1627
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: My 50 roadster pickup build Well, I had noticed that my brake pedal was down low to the floor, after checking Mark said I needed a new master cylinder. So this morning he installed the new unit and we bleed the brakes, everything good now. After that I installed the running board, running board splash apron, etc on the pass. side of truck. I started on the drivers side, but still need to install the splash apron. Will do that tomorrow and take care of a few small things. Here's a couple pics...Jim Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> Last edited by oldman3; 11-02-2018 at 11:22 PM.