The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mfm3 · 11-11-2018, 04:22 PM

I'm happy with the quality of ACC carpet from Stock Interiors but it's about 1/2" too narrow in the foot well area on both sides. It's not noticeable in the picture because I also used the ACC kick panels. I had to add a 1/4" shim behind the bottom edge of each kick panel to close up the gap completely. The carpet is not laying completely flat in this pic because I had just completed the install. The carpet flattened-out quickly.

11-11-2018, 04:22 PM	#23
mfm3 Registered User Join Date: Feb 2013 Location: DFW TX Posts: 132	Re: Source for Carpet? I'm happy with the quality of ACC carpet from Stock Interiors but it's about 1/2" too narrow in the foot well area on both sides. It's not noticeable in the picture because I also used the ACC kick panels. I had to add a 1/4" shim behind the bottom edge of each kick panel to close up the gap completely. The carpet is not laying completely flat in this pic because I had just completed the install. The carpet flattened-out quickly. Attached Images Last edited by mfm3; 11-11-2018 at 08:07 PM.