Re: "Project Orangepeel" 52 A.D
Pic 1. This is the tube I'll start with 1 3/4" o.d from speedway $14.
Pic 2. The 90 is welded in.
Pic 3. Now the U bend can be cut off and clocked to make the next turn.I also was mocking up the placement of the neck going into the tank.
Pic 4. This is the rubber tube (fuel safe) from filler neck supply (lots of great stuff)
Pic 5. So after drilling,vacuum,welding etc. here is the hookup to the tank.
Mark
|