[beaterku]

A few black Friday goodies showed up today. I spent some time working on the truck this weekend. Stripped down the engine bay harness to rework it a little to work better with the LS harness and generally clean things up. I installed an AAW complete harness a few years back. I also took the seat out, removed the tank, removed the gauges and starting thinking about how I am going to run the LS harness. I believe I am going to mount the ECM, TAC, fuse panel under the seat, and Dakota modules under the seat . I want to keep the clutter under the dash to a minimum.

I also bought a filler neck and cap from Boyds to plug the hole in the side of the cab. I think it turned out perfect. I am going to weld a flat plate to the backside to seal the neck from water as well as use it as a keeper to keep the neck from being pulled out.

Waiting on the Entropy rad to come in. Hopefully by Christmas.

I am planning on hitting it hard again Wednesday night to knock out some of the piddly stuff.