The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FLATFENDER54 · 12-04-2018, 11:52 AM

We were going to just rebuild the rear drum brakes but the drums could not be turned anymore. The price of the new HEAVY drums, plus brake shoes was almost 2/3 of the price of the complete rear disc brake kit. The wheel bearings and races looked ok on the full floating hubs so we just cleaned everything up and reused them. A new inboard seal on the hubs and aluminum felpro gasket on the axle flange

12-04-2018, 11:52 AM	#42
FLATFENDER54 Registered User Join Date: Oct 2018 Location: lAWTON Posts: 62	Re: Work begins on the 1962 C10 4WD We were going to just rebuild the rear drum brakes but the drums could not be turned anymore. The price of the new HEAVY drums, plus brake shoes was almost 2/3 of the price of the complete rear disc brake kit. The wheel bearings and races looked ok on the full floating hubs so we just cleaned everything up and reused them. A new inboard seal on the hubs and aluminum felpro gasket on the axle flange Attached Images Last edited by FLATFENDER54; 12-04-2018 at 12:00 PM.