Quote:
Originally Posted by gmachinz
I used 1990 Suburban buckets and console in my ‘86. I sourced 2 complete benchseat brackets from donor 73-87 pickups and used a pair on each bucket seat. I had to drill 2 new holes in the seat bracket frame for each bucket seat so that everything bolted up fine. And the only other mod was shortening the slide liver about 2” because the bench seat ones extend out further than buckets do.
Sorry I dont have any measurements tho-I did this because I didnt want to caveman bend the brackets and have it look goofy...I wanted a factory look.
|
Okay, I think you have done what I’m needing to do. When you used the bench seat sliders, how did you bolt front of slider to bottom of bucket seat? Did you make a bracket? If you look at my picture with the bench seat sliders mounted to floor, there isn’t anything to bolt the bottom of bucket seat to. That is what I need to fabricate and the measured height to make it right.