|
Re: "Crewcab Jake" the 84 to 74 conversion
The rear is done for the most part. I still need to bleed the brakes and mount the small cross brace that the brake line will be secured on. Now I can get back in the cab.
I had noted that the Tamco Epoxy primer goes on thick but tends to lay down with a bit of texture. I mixed it 4:1:1 adding 1 part reducer to help it lay down better. It helped but I still needed to block it flat.
I wet sanded the flat surfaces and scuffed the upper half to ensure good adhesion. Once everything was prepped I wiped the entire surface with cleaner.
|